Building Operations AI
One AI Layer for Every Zone, Learning Across Your Buildings
DomeSystems adds an AI layer to your BMS for automated HVAC decisions, helping teams manage every zone across commercial building portfolios.
| Zone | Temp | Setpt | Mode | Status |
|---|---|---|---|---|
| Floor 3 - NW | 72.4 F | 71.0 F | Cooling | OK |
| Floor 3 - SE | 70.1 F | 71.0 F | Heating | OK |
| Floor 4 - NE | 73.8 F | 72.0 F | Cooling | Adj |
| Floor 4 - SW | 71.5 F | 71.0 F | Cooling | OK |
| Floor 5 - Open | 69.9 F | 70.0 F | Off | OK |
| Lobby | 68.2 F | 69.0 F | Heating | OK |
| Server Room | 65.1 F | 65.0 F | Cooling | OK |
The Operations Gap
Building data needs a layer that acts.
Commercial buildings produce data from sensors, meters, and control systems. Without a layer that turns it into action, facilities teams must respond to issues instead of getting ahead of them.
01
Manual setpoint work
Facilities teams spend hours adjusting HVAC setpoints after tenant feedback and seasonal changes, leaving little time for proactive work.
02
Energy spend without insight
Utility bills arrive monthly, after excess use has occurred. Operators may not see energy anomalies until they appear on an invoice.
03
Portfolio blind spots
Teams managing multiple buildings lack one consistent portfolio view. Separate property operations make comparisons and optimization difficult.
The Process
Three steps to control
DomeSystems connects with existing infrastructure, with recommendations typically available in 7 days.
Link your BMS
Connect Niagara, Tridium, Siemens Desigo, Johnson Controls Metasys, and other major BMS platforms through BACnet/IP, Modbus, and REST APIs. Most buildings are connected within a week.
Set the baseline
DomeSystems uses 14 to 21 days of operating history to model each zone, including occupancy, equipment schedules, and weather.
Auto-optimize
Recommendations return to your BMS on a set schedule. Your team reviews them and retains override authority at every stage.
Pilot Results
Improvements reported in early deployments
Pilot figures come from 18 buildings in our initial cohort. Results vary by building age, climate zone, and existing BMS capability.
Field Notes
What building teams report
Feedback from facilities professionals in the early-access program across commercial portfolios.
"We logged manual setpoint changes three or four times a day. DomeSystems removed that task, and our energy bill fell in the first month."
"The zone-by-zone thermal modeling makes the difference. Generic rules could not handle our older building's quirks. This system learned them."
"The portfolio view won us over. We manage 11 buildings, and now we can spot energy-intensity outliers before they appear on the utility invoice."
Connections
Fits your current systems
No proprietary hardware. DomeSystems reads from and writes to the BMS platforms already installed across your buildings.
Start Here
Ready to optimize instead of react?
Share your portfolio, and we will outline a BMS connection plan.